Ferrous scrap

HMS 1 & 2, mill-ready steel.

Heavy melting steel scrap prepared to charging-box size and traded as HMS 1, HMS 2 or the blends steel mills ask for: 80:20, 70:30 and 60:40.

  • HMS 1 & HMS 2
  • 80:20 · 70:30 · 60:40
  • Charging-box size
  • Bulk & container lots
Heavy melting steel HMS 1 and 2 scrap Ferrous scrap

What is heavy melting steel?

Heavy melting steel (HMS), also called heavy melting scrap, is one of the most widely traded grades of recyclable steel. It is wrought iron and steel scrap cut and prepared to charging-box size so it can be loaded compactly into electric arc furnaces and foundry cupolas.

HMS is divided into two main categories. HMS 1 is free of galvanised and blackened steel and is at least ¼ inch thick. HMS 2 may contain blackened and galvanised steel and can be as thin as ⅛ inch. In practice, HMS is usually traded as a blend: a premium 80:20 mix, or lower-grade 70:30 and 60:40 mixes.

Grades and blends we supply

  • HMS 1: wrought iron and/or steel over ¼ inch thick, free of blackened and galvanised steel, prepared to charging-box size.
  • HMS 2: wrought iron and steel scrap of ⅛ inch thickness and above, including blackened and galvanised steel, prepared for compact charging.
  • 80:20 blend: the premium mix of 80% HMS 1 and 20% HMS 2.
  • 70:30 and 60:40 blends: lower-grade mixes for mills with different furnace requirements.

Need HMS in a specific blend? Tell us the ratio, tonnage and destination port.

Get an HMS priceWhatsApp us

Preparation and sizing

HMS is cut and crushed to charging-box size to ensure compact charging. Typical maximum piece dimensions are 60 × 24 inches for HMS 1, and 36 × 18 inches or 60 × 18 inches for HMS 2, depending on the specification agreed with the buyer. Automobile scrap may be included in HMS 2 where the specification allows, free of sheet iron or thin-gauge material where required.

How HMS is priced

  • Blend ratio: a higher share of HMS 1 commands a higher price.
  • Preparation and density: properly sized material loads better and melts more efficiently.
  • Contamination: non-metallics, coated material outside the specification and excess rust are deducted.
  • Volume, destination and market: ferrous scrap is priced by the ton against international market levels and freight to the destination.

Loading and shipping

HMS moves in bulk and in containers. We agree the blend, inspection and loading terms in advance, and every load is weighed and documented.

Our own steel mill

Since 2024, HMS has also been the raw material for our own steel mill in Ittehad Town, Northern Bypass, Karachi, which recycles heavy melting steel into high-quality iron and steel reinforcing bars for the construction industry. If you have HMS to sell in Pakistan, talk to us about supplying the mill. More about our steel rebar.

Why trade HMS with Khaleej Metal

  • Five decades in the metal trade, family-owned since 1972
  • Five bases in the UAE, Saudi Arabia and Pakistan, including our own steel mill in Karachi
  • ISO 9001 quality assurance, AQSIQ certification and BIR membership
  • More than 50,000 tons of metal traded every year and 2,500+ containers shipped annually

Looking for a regular HMS supply? Let’s talk tonnage and timing.

Request an HMS quoteWhatsApp us

2 grades we trade

HMS 1 & 2 scrap grades, specified.

Specifications follow internationally recognised (ISRI) scrap grade descriptions. Final terms are agreed per lot between buyer and seller.

HMS 1 heavy melting steel scrapHMS 1

Heavy melting steel No. 1

Wrought iron and/or steel scrap more than ¼ inch thick, free of blackened and galvanised steel, crushed to charging-box size for compact charging. Typical maximum piece size 60 × 24 inches, or as agreed.

HMS 2 heavy melting steel scrapHMS 2

Heavy melting steel No. 2

Wrought iron and steel scrap of ⅛ inch thickness and above, including blackened and galvanised steel, prepared to charging-box size (typically 36 × 18 or 60 × 18 inches). May include automobile scrap where the specification allows.

Have HMS 1 & 2 scrap to sell or buy? Get today’s price.

Send grade, quantity and location. Photos help us quote faster.

FAQ

Questions, answered.

Can’t find what you’re looking for? Our trading desk is one call or message away.

What is the difference between HMS 1 and HMS 2?
HMS 1 is heavier steel (over ¼ inch) free of galvanised and blackened steel. HMS 2 is lighter (⅛ inch and above) and may include blackened and galvanised steel. HMS 1 is worth more.
What does HMS 80:20 mean?
It is a blend of 80% HMS 1 and 20% HMS 2, the premium HMS mix. Lower-grade 70:30 and 60:40 blends are also traded.
Do you export HMS by container?
Yes. We supply HMS in bulk and by container. Tell us the blend, tonnage and destination port for a quote.
Does Khaleej Metal use HMS itself?
Yes. Since 2024 our steel mill in Ittehad Town, Northern Bypass, Karachi has recycled HMS scrap into iron and steel reinforcing bars, so we are always interested in reliable HMS supply in Pakistan.

Ready when you are

Have metal to move?

Sell, buy or ship. Talk to the team that has been moving metal across borders for five decades.