Consist of clean old alloy ALUMINIUM sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. And Tale Up to 10%.

With minimum density of 14 pounds per cubic foot (225 kg/m3), and a maximum density of 17 pounds per cubic foot (273 kg/m3) for unflattened UBC and 22 pounds per cubic foot (353 kg/m3) for flattened UBC. Size: Minimum 30 cubic feet (.85 m3), with bale range dimensions of 24” to 40” (61 to 132 cm) by 30” to 52” (76 to 132 cm) by 40” to 84”(102 to 213 cm). The only acceptable tying method shall be as follows: four to six 5/8” (1.6 cm) x .020” (5 mm) steel bands, or six to ten #13 gauge steel wires (ALUMINIUM bands or wires ). skids and/ or support sheets of any material is not used. Magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastic, glass, wood, dirt, grease, trash, and other foreign substances. Variations to specification will be agreed upon prior to shipment between the buyer and seller.

With briquette density of 50 pounds per cubic foot (800 kg/m3) minimum. Nominal briquette size shall range from 12” to 24” (30.5 x 61 cm) x 12” to 24” (30.5 x 61 cm) in uniform profile with a variable length of 8” (20.3 cm) minimum and 48” (122 cm) maximum. Briquettes will be bundled or stacked on skids and secured with a minimum of one vertical band per row and a minimum of one girth band per horizontal layer. Briquettes not to over-hang pallet. Total package height shall be 48 (122 cm) maximum. Banding shall be at least 5/8” (1.6 cm) wide by .020” (5 mm) thick steel strapping or equivalent strength. The weight of any will not exceed 4,000 pounds (1.814 mt). Material are magnetically separated and free of steel, plastic, glass, dirt and all other foreign substances. Free of any and all ALUMINIUM items other than UBC, Items not covered in the specification, including moisture, and any variations to this specification should be agreed upon prior to shipment between the buyer and seller.

Consist of clean ALUMINIUM and copper radiators, and/or ALUMINIUM fins on copper tubing, free of brass tubing, iron and other foreign contamination.

Consist of clean ALUMINIUM radiators and/or condensers. Should be free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and ALUMINIUM content, to be negotiated between buyer and seller.

Consist of new, clean, unalloyed ALUMINIUM wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items.

Shall consist of old, unalloyed ALUMINIUM wire and cable containing not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.

Consist of clean, uncorroded ALUMINIUM borings and turnings of two or more alloys and subject to deductions for fines in excess of 3% through a 20-mesh screen and dirt, free iron, oil, moisture and all other non-metallic items. To avoid dispute, materials will be sold on basis of definite maximum zinc, tin and magnesium content.

Consist of all clean ALUMINIUM castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

Consist of clean, single-piece, unplated aluminum wheels of a single specified alloy, free of
all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification will be agreed upon prior to shipment between the buyer and seller.

Consist of all clean automobile ALUMINIUM castings of sufficient size to be readily identified and to be free from iron, dirt, brass, bushings, and nonmetallic items. Oil and grease not to total more than 2%.

Aluminum Conductor Steel Reinforced (ACSR) wire is a combination of steel and aluminum wire, of various configurations, with the expected aluminum recovery agreed upon by the buyer and the seller. Material will be free of other wires and cables unless mutually agreed upon

(predominantly aluminum)
Will be made up of a combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller. Material generated by eddy current, air separation, flota- tion, screening, other segregation technique(s), or a combination thereof. Shall have passed one or more magnets to reduce or eliminate free iron and/or large iron attachments. Shall be free of radioactive mate- rial, dross, or ash. Material to be bought/sold under this guideline shall be identified as “Zorba” with a number to follow indicating the estimated percent- age nonferrous metal content of the material (e.g., “Zorba 90” means the material contains approxi- mately 90% nonferrous metal content). May also be screened to permit description by specific size ranges. (Refer also to Zorba under Mixed Metals.)